Commercial Metal Roofing
Commercial & Industrial Metal Roofing Systems
Fydea, LLC provides commercial metal roofing for commercial, industrial, institutional, and government construction projects.
As a self-performing union roofing and architectural sheet metal contractor, Fydea can perform metal roofing as a dedicated scope or coordinate it with low-slope roofing and associated architectural sheet metal as part of a larger roofing package.
We work with facility owners, general contractors, and construction managers on new construction, renovation, reroofing, and replacement projects.
PLANNING A COMMERCIAL METAL ROOFING PROJECT? CONTACT FYDEA
Standing Seam Metal Roofing
Standing seam metal roofing is widely used on commercial and institutional buildings where durability, weather protection, and architectural appearance are important considerations.
Depending on the specified system and project conditions, a standing seam metal roof may include:
- Metal Roof Panels
- Concealed Attachment Systems
- Clips and Fasteners
- Underlayment
- Insulation or Thermal Components
- Eave and Rake Conditions
- Ridge and Hip Conditions
- Valleys and Transitions
- Penetration Flashings
- Gutters and Downspouts
- Associated Architectural Sheet Metal
Proper installation requires careful attention to panel layout, attachment, transitions, penetrations, terminations, and interfaces with adjacent building components.
Metal Roof Replacement
Commercial metal roofs can eventually require replacement because of age, deterioration, damage, changing facility requirements, or conditions affecting the existing roofing assembly.
A metal roof replacement project may require evaluation and coordination of:
- Existing metal roof conditions
- Existing substrates
- Removal requirements
- Insulation
- Underlayment
- New metal roof panels
- Perimeter conditions
- Penetrations
- Transitions
- Drainage
- Gutters and downspouts
- Adjacent wall systems
- Low-slope roofing interfaces
- Architectural sheet metal
Fydea evaluates the complete project requirements rather than treating the metal panels as an isolated component.
CONSIDERING A COMMERCIAL METAL ROOF REPLACEMENT? CONTACT FYDEA
New Construction Metal Roofing
Fydea partners with general contractors and construction managers on new commercial and institutional projects requiring metal roofing.
Our self-performing union workforce allows us to maintain direct control over installation, manpower, safety, scheduling, quality, and coordination with other trades.
Metal roofing frequently interfaces with structural components, wall systems, masonry, glazing, low-slope roofing, and other exterior building-envelope materials. Coordination of those conditions is an important part of successful installation.
GENERAL CONTRACTORS — INVITE FYDEA TO BID
Metal Roofing & Low-Slope Roofing
Many commercial buildings incorporate more than one type of roofing system.
A facility may have a standing seam metal roof on one portion of the building while other areas use TPO, EPDM, PVC, modified bitumen, or built-up roofing.
Fydea's experience with both commercial metal roofing and low-slope roofing allows us to coordinate transitions between these systems.
Our commercial roofing capabilities include:
- Commercial Metal Roofing
- TPO Roofing
- EPDM Roofing
- PVC Roofing
- Modified Bitumen Roofing
- Built-Up Roofing
- Architectural Sheet Metal
This can be particularly valuable on projects where multiple roofing systems must function together as part of the overall building envelope.
Metal Roof Service & Repair
Existing commercial metal roofs may develop conditions requiring evaluation or repair without requiring complete replacement.
Depending on the existing roof and conditions, Fydea can assist with evaluation of issues involving:
- Metal Panels
- Seams and Joints
- Fasteners and Attachments
- Penetrations
- Flashings
- Perimeter Conditions
- Transitions
- Gutters and Drainage
- Associated Sheet Metal
- Interfaces With Adjacent Roofing Systems
The appropriate repair strategy depends on the type of metal roof, existing conditions, extent of deterioration, and the owner's long-term plans for the facility.
NEED COMMERCIAL ROOF SERVICE? REQUEST ROOF SERVICE
Architectural Sheet Metal
Commercial metal roofing is closely related to architectural sheet metal.
Fydea's architectural sheet metal capabilities can include components such as:
- Metal Wall Panels
- Metal Siding
- Copings
- Fascia
- Roof Edge Metal
- Gutters and Downspouts
- Counterflashings
- Equipment and Curb Flashings
- Custom-Fabricated Sheet Metal Components
- Associated Roofing Sheet Metal
Having roofing and related sheet metal capabilities under one contractor can simplify coordination of closely connected building-envelope scopes.
LEARN MORE ABOUT ARCHITECTURAL SHEET METAL
Self-Performing Union Roofing & Sheet Metal Contractor
Fydea self-performs its core roofing and architectural sheet metal work using experienced union tradesmen.
Self-performance provides greater direct control over:
- Safety
- Quality
- Manpower
- Workmanship
- Scheduling
- Coordination
- Project Execution
Fydea is also a Service-Disabled Veteran-Owned Small Business (SDVOSB) with commercial and federal roofing experience.
Our work is guided by three principles:
Safety. Quality. Efficiency.
Commercial Metal Roofing in Indiana and Beyond
Fydea is headquartered in Terre Haute, Indiana.
Our core regional market includes Terre Haute, Indianapolis, Lafayette, and surrounding areas.
For larger commercial, institutional, and federal projects, Fydea selectively evaluates opportunities outside our normal operating territory based on project size, scope, schedule, and location.
Talk to Fydea About Your Metal Roofing Project
Whether you are planning a new commercial building, replacing an existing metal roof, evaluating an existing roofing system, or looking for a qualified roofing and sheet metal subcontractor, contact Fydea to discuss the project.
REQUEST ROOF SERVICE | REQUEST A ROOF ASSESSMENT | INVITE FYDEA TO BID
Contact Us